Fabric Light Boxes Production and Assemble of UV Fabric

How to Make Fabric Light Box.

Fabric light box is an aluminum light box. It is frameless design, the graphic  is four-sided seam rubber strip, directly stuck into the aluminum frame. They are very common in advertising market, generally are mount on the wall.

And how to make light box? What is the production process? We introduce the production process of the fabric light box light box in follow:

1. At the first, prepare all the accessories needed: the aluminum profile, corner connector, backboard, power supply, graphic and other tools (screwdriver | screw | tape | gloves).
2. Assemble the four-sided profile frame perfectly by45° angle.
3. Use screwdriver to screw fix the inside and outside screws, and so that the whole light box frame is completed
4. Place the backboard into the frame, screw it, then setting LED on the board and fix it with glass glue. Install the transformer on the at the outlet line edge.
5. Install the fabric panel. the silicone strip that has been installed around the fabric, just insert the silicone strip into the aluminum profile frame. Pull out the strip can remove the graphic.

This is the whole production process of  light box, it is much simpler compared with other advertising equipment. Even you are first time to do it can do well.

UV Fabric Assemble:

When assemble fabric light box should not be a side-by-side installation, such a result will cause silicone strip too long. The first step, fixed position helps to maintain the stretching balance during the installation. The second step, is to nest the middle part of the fabric transverse side to form a six-point positioning.

For some tight conditions in the sealing part of can use hair dryer to soft the silicon strip. If there are some wrinkle after the light box fabric graphic is installed, use hair dryer to blow it to soft and then to level off it.

Lindo Sign ship the light box without assemble to save your shipping cost. Each piece of aluminum frame are cut with 45° per your side requirement. And ship with the accessories you need like transformer, led light, UV fabric, you just need to assemble them according to the guide.

LINDO SIGN supply high quality led light box sign and aluminum profile for sign:

1. Exhibit light box, wall mounted frameless aluminum profile lightbox for advertising;
2. Fabric light box, custom made single sided double sided, round, hexagon and rectangulat light box;
3. Led snap frame, custom ultra slim led light box for internal advertising;
4. Menu light box, custom restaurant sign curved light board and magnetic slim led lightbox.
5. Black SEG extrusion, custom made aluminum profile for lightbox;
6. SEG Extruded aluminum, custom matt silver aluminum profile for fabric tension lightbox;
7. SEG extrusion, gold color frameless frame for tension lightbox;